WorkWindow

Concrete Pouring Weather in Nevada: Best Months by City

Concrete Pouring season in Nevada, city by city: peak months, season boundaries, and annual workable-day counts from NOAA 1991–2020 normals. Henderson leads with 189 workable days a year; Sparks runs the shortest at 97.

Nevada is not one climate: Henderson banks 189 workable concrete pouring days a year while Sparks gets 97 — a spread the table below itemizes month by month. Season boundaries mark the first and last month averaging 8+ workable days against the label rules (40–90°F, nights 40°F+).

If one month anchors the Nevada calendar it's October, the statewide leader in workable days. Use this page to pick the month, then the city page's 10-day strip to pick the days — and the national concrete pouring guide for the physics behind each rule.

Cities in Nevada

Peak months and season boundaries from NOAA 1991–2020 normals; season = months with at least 8 workable days.
CityPeak monthsSeasonWorkable days/yr
Las Vegas Oct, Apr, Nov January–May 175
Reno Sep, Jun, May August–October 119
Henderson Oct, Apr, Nov January–May 189
North Las Vegas Apr, Mar, Oct February–May 146
Enterprise Oct, Apr, Mar February–May 147
Spring Valley Oct, Apr, Mar February–May 147
Sunrise Manor Apr, Mar, Oct February–May 146
Paradise Oct, Apr, Nov January–May 189
Sparks Sep, Jun, May May–June 97
Carson City Aug, Sep, Jun May–September 132

The rules behind these numbers

Typical label thresholds for concrete pouring — the single ruleset used by every check on this page.
CheckThresholdWhy it matters
Air temperature 40–90°F — ideal 50–85°F DIY pours work from 40–90°F; 50–85°F is the sweet spot.
Overnight low ≥40°F during the first 48 h A low under 40°F inside the first 48 hours puts you in cold-weather concreting — not a DIY window.
Dry before no soaking (≥1.0") in the prior 24 h Rain before the pour only matters if the ground is soaked or standing in water.
Dry after <0.1" rain for 6 h after (12 h light rain after finishing still risks surface marks) A downpour in the first 6 hours can wash the surface; after final set, rain actually helps curing.
Wind ≤20 mph (rapid surface drying up to 28 mph) Hot wind pulls bleed water out faster than the slab can handle.

Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.

Other tasks in Nevada

More