Concrete Pouring Weather in Burlington, VT: 10-Day Windows & Best Months
The concrete pouring season in Burlington runs May through October — 6 months averaging at least 8 workable days by NOAA 1991–2020 normals. August leads the calendar with 19 workable days: average high 81°F, low 61°F, rain on 37% of days. Below: today through day 10 against the label rules, then the year at a glance.
GOOD — every label check passes MARGINAL — one soft fail NO — hard fail or several soft
The rules this check uses
The Burlington strip runs on these rows — bagged-mix consensus for DIY-scale work, ruled by the 48-hour freeze check. Structural pours answer to an engineer and ACI, not to this page.
| Check | Threshold | Why it matters |
|---|---|---|
| Air temperature | 40–90°F — ideal 50–85°F | The film (or mix) chemistry runs on temperature — both while you work and for the first hours after. |
| Overnight low | ≥40°F during the first 48 h | Curing continues after dark; the first night can undo a perfect afternoon. |
| Dry before | no soaking (≥1.0") in the prior 24 h | Checked backward from your start hour using the two look-back days in the forecast data. |
| Dry after | <0.1" rain for 6 h after (12 h light rain after finishing still risks surface marks) | The engine sums forecast rain hour by hour through the cure window for Burlington. |
| Wind | ≤20 mph (rapid surface drying up to 28 mph) | Hot wind pulls bleed water out faster than the slab can handle. |
Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.
Best months for concrete pouring in Burlington
| Month | Avg high | Avg low | Rain odds/day | Workable days | |
|---|---|---|---|---|---|
| January | 29°F | 13°F | 47% | 0 | |
| February | 32°F | 14°F | 42% | 0 | |
| March | 41°F | 24°F | 42% | 0 | |
| April | 55°F | 36°F | 43% | 3 | |
| May | 69°F | 48°F | 43% | 18 | |
| June | 78°F | 57°F | 45% | 17 | |
| July | 82°F | 62°F | 42% | 18 | |
| August | 81°F | 61°F | 37% | 19 | |
| September | 73°F | 53°F | 37% | 19 | |
| October | 59°F | 42°F | 42% | 12 | |
| November | 46°F | 32°F | 46% | 0 | |
| December | 35°F | 21°F | 49% | 0 |
The working season runs May through October — about 106 workable days a year. The edges are night-limited: label rules want overnight lows of 40°F+, and Burlington's nights only average that from May to October. The Vermont table ranks every listed city by the same math.
Temperature-wise, summer passes easily in Burlington; the rain rules do the filtering. With a 42% daily rain chance in July, roughly one day in 2 starts a wet stretch that voids the cure window.
Flip side of the driveway calendar: sealing in Burlington opens later and closes earlier than pouring, on the same forecast.
Source honesty: every monthly figure on this page is the 1991–2020 normal at Burlington Intl Ap, Vt Us, 6.8 km from Burlington's center — your block's shade lines and wind exposure sit on top of that baseline. Scoring details are on the methodology page.
Burlington by the numbers
- Hottest month: July — 82°F average high, 0 days topping 90°F.
- The cold floor is January at 29°F afternoons and 13°F overnight.
- Measurable rain: December leads at 49% of days; September is the quiet end at 37%.
- The 40°F-night season spans May–October here.
- Bottom line for Burlington: roughly 106 workable concrete pouring days a year.
Prep checklist
- Check two nights, not one afternoon: both must hold 40°F+. In Burlington that math works May through October — outside it, 13°F lows own the calendar.
- Nothing gets mixed until the site is staged — braced forms, compacted damp base, rinsed tools, a second pair of hands.
- Cut plastic sheeting and weight it at the pour's edge — Burlington sees rain on 37% of August days, and the 6-hour rule doesn't negotiate.
- Mix to a low slump — thick oatmeal, not soup; extra water now is a weak surface forever.
- Timing beats muscle — screed wet, float at the dull stage, and never chase bleed water with a trowel.
- Edge and joint with an edger + float set — control joints every 2–3 slab-thicknesses in feet.
- Cure damp: sheeting or misting for days; against a Burlington cold snap, a curing blanket guards the first 48 hours.
- Keep feet off 24–48 hours and cars off a week; structural pours follow the engineer and ACI, full stop.
Gear that saves a window
Transparency note: gear links here become affiliate links only when the program is enabled — today they are plain references. See the affiliate disclosure.
-
Edger + float set
Rounded edges and a flat surface before it sets.
-
IR surface thermometer
Track slab temperature, not just the forecast.
-
Concrete mix
An 80-lb bag yields about 0.6 cu ft — do the math twice.
-
Plastic sheeting
Emergency rain cover and moisture-holding cure layer.
FAQ
What temperature is too cold to pour concrete?
For DIY: any low under 40°F within 48 hours of the pour — that's cold-weather concreting (blankets, accelerators, monitoring), not a weekend job. In Burlington, nights average 40°F+ only May–October, which is what actually frames the season above.
Can you pour concrete before rain?
Only with 6+ hours of margin: a 0.1"+ downpour before final set washes cement paste off the finish. After set, rain helps the cure. Burlington's December sees rain 49% of days — keep plastic sheeting cut and weighted at the pour's edge regardless of the forecast.
How long does concrete need to be protected from freezing?
48 hours minimum — that's when early strength forms, and ice inside that window scales the surface and weakens the slab for good. Burlington's freeze risk lives at the season edges: January averages 31 nights under 40°F. Insulated curing blankets are the DIY answer to a surprise cold snap.
Is it OK to pour concrete in hot weather?
The ideal band is 50–85°F; 85–90°F earns a flag and 90°F+ is out. Burlington's July highs average 82°F, so heat rarely closes the window here — cold nights are the local constraint.
How long before you can drive on new concrete?
About 7 days for a passenger car in Burlington's August conditions (81°F average highs — textbook cure speed); foot traffic after 24–48 hours. Cool weather stretches everything, because cure runs on temperature. Heavy vehicles wait longest, and the bag's schedule outranks any general rule, including this one.
Best season for concrete work in Burlington?
May through october — the months with 40°F+ nights, sub-90°F days, and manageable rain. August leads at 19 workable days; January bottoms out near 0.
Related
Other projects in Burlington
- Deck Staining in Burlington
- Exterior Painting in Burlington
- Driveway Sealing in Burlington
- Roof Coating in Burlington
- Lawn Seeding in Burlington
- All outdoor project weather in Burlington
Concrete Pouring nearby
- Montpelier, VT
- Concord, NH
- Albany, NY
- Manchester, NH
- Utica, NY
- Nashua, NH
- Leominster, MA
- Portsmouth, NH
Guides
Climatology: NOAA 1991–2020 normals via BURLINGTON INTL AP, VT US (6.8 km from Burlington center, elevation 330 ft); live outlook by Open-Meteo.