WorkWindow

Driveway Sealing Weather in Plymouth, MN: 10-Day Windows & Best Months

Plymouth gives you roughly 80 workable driveway sealing days a year, concentrated June through September. August leads the calendar with 22 workable days: average high 80°F, low 61°F, rain on 30% of days. Below: the live 10-day check and Plymouth's full month-by-month table.

GOOD — a clean label day MARGINAL — one borderline check NO — hard fail or stacked flags

The rules this check uses

Typical sealer-pail requirements, applied to Plymouth's forecast above; the site checks 36 cure hours as the midpoint of the 24–48 that labels quote. Rising temperatures matter as much as the number.

Typical label thresholds for driveway sealing — the ruleset behind every Plymouth verdict above.
CheckThresholdWhy it matters
Air temperature 55–90°F, and rising Sealer wants 55°F and rising — pavement must be warm enough to cure the emulsion.
Overnight low ≥50°F during the first 24 h The first 24 hours of cure need overnight lows of 50°F or better.
Dry before ≤0.05" rain in the prior 24 h What fell before you start matters as much as what falls after — surfaces hold water invisibly.
Dry after <0.05" rain for 36 h after (48 h cool or shaded driveways want 48 h) The make-or-break window: rain here undoes the work, not just delays it.
Evening dew-point spread ≥5°F from 6–11 pm Heavy evening dew can blush an uncured sealcoat.
Daytime humidity ≤85% Humid air slows evaporation, stretching dry times into the risky evening hours.
Wind ≤20 mph (dust and debris in wet sealer up to 28 mph) Scored on the windiest working hour; the marginal band changes the method, not the day.

Always follow your product label — formulas vary. Treat the table as the consensus range across brands — the label in your hand is the final word.

Best months for driveway sealing in Plymouth

How Plymouth months rank: temperature-rule days minus NOAA rain odds, from 1991–2020 normals. An estimate for planning, not a forecast.
MonthAvg highAvg lowRain odds/dayWorkable days 
January 24°F 7°F 32% 0
February 29°F 11°F 28% 0
March 42°F 23°F 30% 0
April 57°F 35°F 38% 0
May 69°F 48°F 42% 6
June 78°F 58°F 40% 18
July 82°F 63°F 34% 20
August 80°F 61°F 30% 22
September 72°F 52°F 32% 14
October 57°F 39°F 31% 0
November 41°F 26°F 28% 0
December 28°F 14°F 32% 0

The season is genuinely short: June through September, 4 months in total. Outside it, the blocker is cold — January tops out near 24°F with nights around 7°F, far under the 50°F overnight floor. When a June or September window opens on the strip above, it may be the only one that month. Neighboring towns shift by a month or more — the Minnesota comparison shows where Plymouth sits.

The other driveway job reads differently: pouring concrete in Plymouth cares about two safe nights, not rising afternoons.

Climatology here is measured at New Hope, Mn Us (6.6 km away). Treat the monthly numbers as the neighborhood average; a shaded north-side deck runs colder and damper than any of them. The exact formula lives in the methodology.

Plymouth by the numbers

Prep checklist

  1. The strip above is hunting one shape: 55°F rising, a 50°F+ night, 36 dry hours. Plymouth produces it 22 days in a typical August.
  2. Fill cracks a day ahead with crack filler so it skins before sealer covers it.
  3. Degrease oil spots and sweep to bare, dry asphalt — sealer bonds to pavement, not dust.
  4. Confirm the lookback: under 0.05" of rain in the prior 24 h — after a May shower (42% of days), cracks hold water longest.
  5. Tape the garage slab and sidewalk lines with edging tape — drips on concrete are forever.
  6. Pull thin passes with a squeegee/brush combo, back-brushing the texture as you go.
  7. Morning start at the garage end, working toward the street — Plymouth's August gives the coat 80°F daylight before the evening spread tightens.
  8. Keep tires off through the full cure — with August nights at 61°F, shaded strips need the long end of 24–48 h.

Gear that saves a window

Heads up: product links on this page may become affiliate links when the program is enabled. See the affiliate disclosure.

FAQ

What temperature do you need to seal a driveway?

The pail wants 55°F+ air, a 50°F+ first night, and temperatures trending up through the cure. Plymouth clears all three reliably from June through September; outside that, January's 7°F average nights end the argument.

How long after rain can I sealcoat?

Give it a full dry day: the engine fails any start within 24 hours of measurable rain. Filled cracks dry last. Plymouth's rain-day odds run 28–42% across the year, so the same rule costs different months very differently.

How long does driveway sealer take to dry before rain or cars?

Labels say 24–48 hours; this site checks 36 as the honest middle. Foot traffic sooner, tires last. Plymouth's cure risk is mostly rain timing — in May, odds of a wet day inside a 36-hour window run high enough that the strip above is the only sane scheduler.

Can you seal a driveway in the fall?

In Plymouth, early fall works while nights hold: the season's last reliable month is September (average low 52°F against the 50°F first-night rule). After that, warm afternoons sit on cold slabs and the cure stalls.

How often should a driveway be sealed?

Every 2–4 years, or when water stops beading and the surface grays. More often builds a peeling film; less often lets water work the cracks through Plymouth's 31 sub-40°F January nights. New asphalt cures 6–12 months before its first coat — and crack filler goes in a day ahead.

Best month to seal a driveway in MN?

For Plymouth: August and July — August leads with 22 workable days (high 80°F, rain on 30% of days, nights 61°F). Elsewhere in MN, the state page ranks every listed city by the same math.

Other projects in Plymouth

Driveway Sealing nearby

Guides

Climatology: NOAA 1991–2020 normals via NEW HOPE, MN US (6.6 km from Plymouth center, elevation 910 ft); live outlook by Open-Meteo.