Driveway Sealing Weather in Mount Pleasant, SC: 10-Day Windows & Best Months
The driveway sealing season in Mount Pleasant runs March through November — 9 months averaging at least 8 workable days by NOAA 1991–2020 normals. October leads the calendar with 24 workable days: average high 76°F, low 63°F, rain on 23% of days. Below: today through day 10 against the label rules, then the year at a glance.
GOOD — every label check passes MARGINAL — one soft fail NO — hard fail or several soft
The rules this check uses
The Mount Pleasant verdicts run on these rows — consensus pail numbers with one editorial call: 36 cure hours, the honest middle of the 24–48 range labels print.
| Check | Threshold | Why it matters |
|---|---|---|
| Air temperature | 55–90°F, and rising | The film (or mix) chemistry runs on temperature — both while you work and for the first hours after. |
| Overnight low | ≥50°F during the first 24 h | Curing continues after dark; the first night can undo a perfect afternoon. |
| Dry before | ≤0.05" rain in the prior 24 h | Checked backward from your start hour using the two look-back days in the forecast data. |
| Dry after | <0.05" rain for 36 h after (48 h cool or shaded driveways want 48 h) | The engine sums forecast rain hour by hour through the cure window for Mount Pleasant. |
| Evening dew-point spread | ≥5°F from 6–11 pm | When air temperature meets the dew point, water condenses on your fresh work first. |
| Daytime humidity | ≤85% | Read as the daytime maximum, 10 a.m.–5 p.m.; within 3 points of the limit counts as marginal. |
| Wind | ≤20 mph (dust and debris in wet sealer up to 28 mph) | Strong wind drops leaves and grit into the wet coat. |
Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.
Best months for driveway sealing in Mount Pleasant
| Month | Avg high | Avg low | Rain odds/day | Workable days | |
|---|---|---|---|---|---|
| January | 58°F | 44°F | 27% | 0 | |
| February | 60°F | 46°F | 28% | 0 | |
| March | 66°F | 52°F | 25% | 19 | |
| April | 72°F | 60°F | 23% | 23 | |
| May | 79°F | 68°F | 24% | 23 | |
| June | 84°F | 74°F | 33% | 20 | |
| July | 88°F | 77°F | 37% | 19 | |
| August | 86°F | 76°F | 37% | 19 | |
| September | 83°F | 72°F | 29% | 21 | |
| October | 76°F | 63°F | 23% | 24 | |
| November | 67°F | 53°F | 21% | 22 | |
| December | 61°F | 47°F | 26% | 0 |
The working season runs March through November — about 191 workable days a year. The edges are night-limited: label rules want overnight lows of 50°F+, and Mount Pleasant's nights only average that from March to November. The South Carolina table ranks every listed city by the same math.
The other driveway job reads differently: pouring concrete in Mount Pleasant cares about two safe nights, not rising afternoons.
Source honesty: every monthly figure on this page is the 1991–2020 normal at Charleston City, Sc Us, 13.1 km from Mount Pleasant's center — your block's shade lines and wind exposure sit on top of that baseline. Scoring details are on the methodology page.
Mount Pleasant by the numbers
- Hottest month: July — 88°F average high, 0 days topping 90°F.
- The cold floor is January at 58°F afternoons and 44°F overnight.
- Measurable rain: July leads at 37% of days; November is the quiet end at 21%.
- The 50°F-night season spans March–November here.
- Bottom line for Mount Pleasant: roughly 191 workable driveway sealing days a year.
Prep checklist
- The strip above is hunting one shape: 55°F rising, a 50°F+ night, 36 dry hours. Mount Pleasant produces it 24 days in a typical October.
- Day-before job: crack filler in every crack, so it cures before the sealcoat lands.
- Hit oil spots with degreaser and sweep hard; sealer over dust peels in playing-card flakes.
- Confirm the lookback: under 0.05" of rain in the prior 24 h — after a July shower (37% of days), cracks hold water longest.
- Tape the garage slab and sidewalk lines with edging tape — drips on concrete are forever.
- Pull thin passes with a squeegee/brush combo, back-brushing the texture as you go.
- Morning start at the garage end, working toward the street — Mount Pleasant's October gives the coat 76°F daylight before the evening spread tightens.
- Keep tires off through the full cure — with October nights at 63°F, shaded strips need the long end of 24–48 h.
Gear that saves a window
Transparency note: gear links here become affiliate links only when the program is enabled — today they are plain references. See the affiliate disclosure.
-
Crack filler
Fill cracks a day ahead so filler cures before sealer.
-
Driveway sealer, 5-gal
Coverage runs 250–400 sq ft per pail — measure first.
-
Squeegee/brush combo
Pull with the squeegee, back-brush the texture.
-
Edging tape
Keeps the garage slab and sidewalk edges black-free.
FAQ
What temperature do you need to seal a driveway?
The pail wants 55°F+ air, a 50°F+ first night, and temperatures trending up through the cure. Mount Pleasant clears all three reliably from March through November; outside that, January's 44°F average nights end the argument.
How long after rain can I sealcoat?
Give it a full dry day: the engine fails any start within 24 hours of measurable rain. Filled cracks dry last. Mount Pleasant's rain-day odds run 21–37% across the year, so the same rule costs different months very differently.
How long does driveway sealer take to dry before rain or cars?
Labels say 24–48 hours; this site checks 36 as the honest middle. Foot traffic sooner, tires last. Mount Pleasant's cure risk is mostly rain timing — in July, odds of a wet day inside a 36-hour window run high enough that the strip above is the only sane scheduler.
Can you seal a driveway in the fall?
In Mount Pleasant, early fall works while nights hold: the season's last reliable month is November (average low 53°F against the 50°F first-night rule). After that, warm afternoons sit on cold slabs and the cure stalls.
How often should a driveway be sealed?
Every 2–4 years, or when water stops beading and the surface grays. More often builds a peeling film; less often lets water work the cracks. New asphalt cures 6–12 months before its first coat — and crack filler goes in a day ahead.
Best month to seal a driveway in SC?
October tops Mount Pleasant's table at 24 days clearing the 55–90°F-rising, 50°F-night, 36-dry-hour stack; October and May together carry the season. Check the SC state page for how the ranking shifts across the state.
Related
Other projects in Mount Pleasant
- Deck Staining in Mount Pleasant
- Exterior Painting in Mount Pleasant
- Concrete Pouring in Mount Pleasant
- Roof Coating in Mount Pleasant
- Lawn Seeding in Mount Pleasant
- All outdoor project weather in Mount Pleasant
Driveway Sealing nearby
- Charleston, SC
- North Charleston, SC
- Myrtle Beach, SC
- Florence, SC
- Savannah, GA
- Columbia, SC
- Augusta, GA
- Wilmington, NC
Guides
Climatology: NOAA 1991–2020 normals via CHARLESTON CITY, SC US (13.1 km from Mount Pleasant center, elevation 10 ft); live outlook by Open-Meteo.