Exterior Painting Weather in Quincy, MA (2026): 10-Day Windows & Best Months

Q: What temperature can you paint outside?

50–90°F for standard formulas, 35°F+ for low-temp lines, and the wall itself must stay 5°F above the dew point. In Quincy the practical range is set by nights: the 40°F overnight floor arrives around May and leaves after October.

Q: How many dry hours does exterior paint need before rain?

Plan 24 rain-free hours after the last coat; the engine fails any day that can't deliver them. With Quincy's rain odds swinging from 31% of days in September to 42% in May, the strip above is mostly a search for that dry pair.

Q: Why does dew ruin fresh paint?

Fresh latex needs hours before it can take standing water; evening condensation gets there first on cooling siding. The check: air minus dew point from 6–11 p.m., 5°F or better. Humid May evenings in Quincy are when GOOD afternoons hide failing nights.

Q: Can you paint in high humidity?

Up to about 80% daytime RH — above that, dry times stretch until the film meets the evening dew. 80–83% reads MARGINAL on the engine; more is a fail. Pair humidity with Quincy's dew-point spread rule and paint mornings-into-early-afternoons in the humid months.

Q: What is surface temperature vs air temperature?

Two different numbers: air (what the app shows) and the wall (what the paint feels). Sun adds 20°F or more; evening radiational cooling subtracts. That's why the engine checks the 90°F top on Quincy's hot afternoons and the dew-point spread after sunset — both are surface problems the air forecast hides.

Q: When does painting season end in Quincy?

When nights stop clearing 40°F — in Quincy that's typically after October, when average lows hit 44°F and falling. Low-temp formulas (35°F rated) buy a few extra weeks; the engine shows them as MARGINAL days before the hard close.

Q: What humidity is too high for exterior painting?

Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for Quincy and aim for a falling-humidity afternoon.

Q: What is the dew point rule for exterior painting?

Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.

Q: How windy is too windy to paint outside?

Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.

Q: Why is my fresh exterior paint blistering?

Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.

JulyBest month
121 daysWorkable days/yr
6 moSeason length
31–42%Rain-day odds
Quincy by month

The next 10 days in Quincy

GOOD — a clean label day MARGINAL — one borderline check NO — hard fail or stacked flags

The rules this check uses

The engine scores every Quincy day against this table — typical latex-label numbers, with 35–50°F highs flagged for low-temperature formulas.

Typical label thresholds for exterior painting — the ruleset behind every Quincy verdict above.
Check	Threshold	Why it matters
Air temperature	50–90°F (low-temp formulas from 35°F)	Standard latex wants 50°F+. Some low-temperature formulas are rated down to 35°F.
Overnight low	≥35°F during the first 24 h (≥40°F preferred)	Paint keeps curing overnight; a low under 40°F stalls standard latex.
Dry before	≤0.05" rain in the prior 12 h; watch back to 24 h	What fell before you start matters as much as what falls after — surfaces hold water invisibly.
Dry after	<0.05" rain for 24 h after	The make-or-break window: rain here undoes the work, not just delays it.
Evening dew-point spread	≥5°F from 6–11 pm	Surface should stay at least 5°F above the dew point; dew flat-spots fresh paint.
Daytime humidity	≤80%	Humid air slows evaporation, stretching dry times into the risky evening hours.
Wind	≤15 mph (brush only up to 20 mph)	Scored on the windiest working hour; the marginal band changes the method, not the day.

Always follow your product label — formulas vary. Treat the table as the consensus range across brands — the label in your hand is the final word.

Best months for exterior painting in Quincy

Workable days (bar height)Avg high °FAvg low °FRain odds (dot size)

How Quincy months rank: temperature-rule days minus NOAA rain odds, from 1991–2020 normals. An estimate for planning, not a forecast.
Month	Avg high	Avg low	Rain odds/day	Workable days
January	35°F	18°F	42%	0
February	37°F	20°F	40%	0
March	44°F	27°F	41%	0
April	56°F	38°F	41%	6
May	67°F	48°F	42%	18
June	75°F	58°F	39%	18
July	82°F	64°F	35%	20
August	80°F	63°F	33%	21
September	73°F	56°F	31%	21
October	61°F	44°F	36%	17
November	50°F	34°F	37%	0
December	40°F	25°F	41%	0

Figure 121 workable days a year in Quincy, spread across May through October. Shoulder months turn on the overnight rule: an afternoon at 67°F passes, but the 40°F night floor is what actually opens the season in May. Neighboring towns shift by a month or more — the Massachusetts comparison shows where Quincy sits.

If the walls pass, the roof might too: roof coating in Quincy uses the same film chemistry with tighter dew and wind limits.

Climatology here is measured at Blue Hill Coop, Ma Us (8.9 km away). Treat the monthly numbers as the neighborhood average; a shaded north-side deck runs colder and damper than any of them. The exact formula lives in the methodology.

For contrast, Newton, MA’s exterior painting calendar sits one stop back on this route, and exterior painting in Somerville, MA is next in line.

Quincy by the numbers

Peak heat lands in July: 82°F average highs and 0 ninety-degree days.
January bottoms the Quincy year: 35°F days, 18°F nights.
Rain-day odds swing from 31% in September to 42% in May.
Nights averaging 40°F+ run May through October.
Annual workable exterior painting days: about 121 of 365.

Prep checklist

Find application day plus 24 dry hours with nights at 40°F+; Quincy offers that pairing most often in August (21 workable days).
Wash the wall and scrape everything loose; paint bonds to substrate, not chalk.
Give washed siding 24 hours — north walls in Quincy can need double after a May-grade soak.
An ir surface thermometer settles arguments: label limits bind the wall surface, which outruns Quincy's air by 20°F+ in sun.
Spot-prime bare wood and bleed-through, then caulk the gaps on a touch-dry surface.
Sequence walls so you always paint in shade; midday sun skins latex before it levels.
Cut in with an angled brush set, roll a wet edge, and drop the sprayer plan over 15 mph.
Stop 2 hours before sunset: with August lows near 63°F, Quincy's siding meets the dew point before the late news.

Pro moves for Quincy conditions

Follow the shade around the house instead of the sun; siding that's hot to the touch will blister paint even when air temperature reads fine.
Cold-rated acrylics that apply down to 35°F still need surfaces to stay above freezing for the next 36 to 48 hours, so check overnight lows.
Dark colors can push a sunlit wall 30°F or more above air temperature; schedule dark accents for early morning or overcast days.
Stop painting two to three hours before the evening dew point converges with air temperature, or the finish can develop dull spots and surfactant streaks.
In Quincy, humidity typically bottoms out mid-afternoon; save the final topcoat for that window and use mornings for prep and priming.

Gear that saves a window

Heads up: product links on this page may become affiliate links when the program is enabled. See the affiliate disclosure.

Exterior paint + primer
One-coat hide on sound, prepped siding.
Canvas drop cloths
Grips ladders and won't shred like plastic.
Angled brush set
Control at trim, corners, and cut-in lines.
IR surface thermometer
Reads the wall, not the air — sun-baked siding runs hotter.

Frequently asked questions

What temperature can you paint outside?

50–90°F for standard formulas, 35°F+ for low-temp lines, and the wall itself must stay 5°F above the dew point. In Quincy the practical range is set by nights: the 40°F overnight floor arrives around May and leaves after October.

How many dry hours does exterior paint need before rain?

Plan 24 rain-free hours after the last coat; the engine fails any day that can't deliver them. With Quincy's rain odds swinging from 31% of days in September to 42% in May, the strip above is mostly a search for that dry pair.

Why does dew ruin fresh paint?

Fresh latex needs hours before it can take standing water; evening condensation gets there first on cooling siding. The check: air minus dew point from 6–11 p.m., 5°F or better. Humid May evenings in Quincy are when GOOD afternoons hide failing nights.

Can you paint in high humidity?

Up to about 80% daytime RH — above that, dry times stretch until the film meets the evening dew. 80–83% reads MARGINAL on the engine; more is a fail. Pair humidity with Quincy's dew-point spread rule and paint mornings-into-early-afternoons in the humid months.

What is surface temperature vs air temperature?

Two different numbers: air (what the app shows) and the wall (what the paint feels). Sun adds 20°F or more; evening radiational cooling subtracts. That's why the engine checks the 90°F top on Quincy's hot afternoons and the dew-point spread after sunset — both are surface problems the air forecast hides.

When does painting season end in Quincy?

When nights stop clearing 40°F — in Quincy that's typically after October, when average lows hit 44°F and falling. Low-temp formulas (35°F rated) buy a few extra weeks; the engine shows them as MARGINAL days before the hard close.

What humidity is too high for exterior painting?

Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for Quincy and aim for a falling-humidity afternoon.

What is the dew point rule for exterior painting?

Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.

How windy is too windy to paint outside?

Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.

Why is my fresh exterior paint blistering?

Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.

Exterior Painting glossary

Dew point spread: The gap between air temperature and dew point; painting standards call for surfaces at least 5°F above the dew point to prevent invisible condensation under fresh paint.
Surfactant leaching: Sticky brown or glossy streaks that surface when latex paint dries in cool, damp conditions; usually cosmetic and rinses off after the paint fully cures.
Wet edge: Keeping the boundary of just-applied paint wet so the next stroke blends invisibly; heat, wind, and low humidity shorten it and cause lap marks.
Surface temperature: The actual temperature of siding, which can run 20 to 40°F above air temperature in direct sun; paint labels' limits apply to the surface, not the forecast.
Full cure: The point when paint reaches final hardness and washability — typically 2 to 4 weeks for exterior acrylics — distinct from dry-to-touch, which takes only hours.
Blocking: Fresh paint sticking to itself where surfaces touch, like doors against jambs; worst in heat and humidity before the film fully cures.

People also search for

Other projects in Quincy

Exterior Painting nearby

Guides

Climatology: NOAA 1991–2020 normals via BLUE HILL COOP, MA US (8.9 km from Quincy center, elevation 625 ft); live outlook by Open-Meteo.

Exterior Painting Weather in Quincy, MA: 10-Day Windows & Best Months