WorkWindow

Exterior Painting · Texas

Exterior Painting Weather in San Angelo, TX: 10-Day Windows & Best Months

In San Angelo, the label math works from March through May: that's the stretch with 8+ workable days a month against typical exterior painting rules. March leads the calendar with 26 workable days: average high 73°F, low 46°F, rain on 16% of days. The strip above runs San Angelo's live forecast; the table below ranks all 12 months.

Best month: March · 26 workable days

The next 10 days in San Angelo

GOOD — clears every rule MARGINAL — exactly one soft miss NO — a hard fail, or two soft

The rules this check uses

Each verdict above is this table applied to San Angelo's forecast. Standard latex rules, with the 35°F-rated formulas handled as a marginal band, not a pass.

Typical label thresholds for exterior painting — the ruleset behind every San Angelo verdict above.
CheckThresholdWhy it matters
Air temperature 50–90°F (low-temp formulas from 35°F) Checked across the working day, 8 a.m.–6 p.m., against San Angelo's hourly forecast — not just the daily high.
Overnight low ≥35°F during the first 24 h (≥40°F preferred) The engine reads every overnight hour in the cure window, not just San Angelo's forecast low.
Dry before ≤0.05" rain in the prior 12 h; watch back to 24 h The surface must be dry to the touch and out of a recent soak.
Dry after <0.05" rain for 24 h after Rain inside the first 24 hours can streak or wash fresh paint.
Evening dew-point spread ≥5°F from 6–11 pm Scored on the worst hour between 6 and 11 p.m., when surfaces cool past the air.
Daytime humidity ≤80% High humidity extends recoat and cure times.
Wind ≤15 mph (brush only up to 20 mph) Wind wrecks application first (drift, lap marks) and carries debris into wet work second.

Always follow your product label — formulas vary. These rows are the industry-typical range; the can in your San Angelo garage is the contract.

Best months for exterior painting in San Angelo

January: 0 workable days · high 61°F / low 34°F · rain 14% of daysFebruary: 4 workable days · high 66°F / low 38°F · rain 16% of daysMarch: 26 workable days · high 73°F / low 46°F · rain 16% of daysApril: 25 workable days · high 82°F / low 52°F · rain 16% of daysMay: 17 workable days · high 89°F / low 62°F · rain 20% of daysJune: 0 workable days · high 94°F / low 70°F · rain 20% of daysJuly: 0 workable days · high 97°F / low 72°F · rain 15% of daysAugust: 0 workable days · high 97°F / low 72°F · rain 18% of daysSeptember: 15 workable days · high 89°F / low 65°F · rain 18% of daysOctober: 26 workable days · high 80°F / low 54°F · rain 18% of daysNovember: 20 workable days · high 69°F / low 43°F · rain 14% of daysDecember: 0 workable days · high 62°F / low 35°F · rain 13% of daysJanuary avg high 61°FJanuary avg low 34°FFebruary avg high 66°FFebruary avg low 38°FMarch avg high 73°FMarch avg low 46°FApril avg high 82°FApril avg low 52°FMay avg high 89°FMay avg low 62°FJune avg high 94°FJune avg low 70°FJuly avg high 97°FJuly avg low 72°FAugust avg high 97°FAugust avg low 72°FSeptember avg high 89°FSeptember avg low 65°FOctober avg high 80°FOctober avg low 54°FNovember avg high 69°FNovember avg low 43°FDecember avg high 62°FDecember avg low 35°FJanuary: rain on 14% of daysJFebruary: rain on 16% of daysFMarch: rain on 16% of daysMApril: rain on 16% of daysAMay: rain on 20% of daysMJune: rain on 20% of daysJJuly: rain on 15% of daysJAugust: rain on 18% of daysASeptember: rain on 18% of daysSOctober: rain on 18% of daysONovember: rain on 14% of daysNDecember: rain on 13% of daysD34°65°97°042625170001526200
Workable days (bar height)Avg high °FAvg low °FRain odds (dot size)
Workable days in San Angelo, TX: days meeting the temperature rules, discounted by NOAA rain odds — a 1991–2020 estimate, not a forecast.
MonthAvg highAvg lowRain odds/dayWorkable days 
January 61°F 34°F 14% 0
February 66°F 38°F 16% 4
March 73°F 46°F 16% 26
April 82°F 52°F 16% 25
May 89°F 62°F 20% 17
June 94°F 70°F 20% 0
July 97°F 72°F 15% 0
August 97°F 72°F 18% 0
September 89°F 65°F 18% 15
October 80°F 54°F 18% 26
November 69°F 43°F 14% 20
December 62°F 35°F 13% 0

The working season runs March through May — about 132 workable days a year. The edges are night-limited: label rules want overnight lows of 40°F+, and San Angelo's nights only average that from March to November. For the statewide picture, the Texas page compares peak months city by city.

Midsummer is the trap month in San Angelo — 97°F average highs against a 90°F limit. The best-months table is honest about it: March beats July with 26 workable days to 0.

Related check: roof coating in San Angelo — same 50–90°F chemistry, but roofs hit the dew point first and wind is a safety stop.

Numbers above come from NOAA's 1991–2020 normals for San Angelo, Tx Us, 8.8 km from the city center — close enough that neighborhood microclimates (shade lines, river valleys, urban heat) matter more than station distance. See how these day counts are scored.

The loop continues nearby: check exterior painting weather in Round Rock, TX one stop back, or San Antonio, TX’s exterior painting windows one stop ahead.

San Angelo by the numbers

Prep checklist

  1. Two clean days beat one perfect one: 24 h of dry cure and a 40°F+ night — March is San Angelo's highest-odds month (26 days).
  2. Prep is the coat that matters — wash off chalk and mildew, scrape to sound edges.
  3. Give washed siding 24 hours — north walls in San Angelo can need double after a May-grade soak.
  4. Read the wall, not the app: an ir surface thermometer on sunlit siding shows 20°F+ over San Angelo's reported 73°F.
  5. Prime bare wood and stains; caulk once the surface is dry to the touch.
  6. Follow the shade around the house — never a wall in direct midday sun.
  7. Cut in with an angled brush set, roll a wet edge, and drop the sprayer plan over 15 mph.
  8. Stop 2 hours before sunset: with March lows near 46°F, San Angelo's siding meets the dew point before the late news.

Pro moves for San Angelo conditions

Gear that saves a window

FTC note: the gear below is unlinked until the affiliate program is switched on. See the affiliate disclosure.

Frequently asked questions

What temperature can you paint outside?

Standard latex: 50–90°F with nights of 40°F+; low-temperature formulas are rated down to 35°F and the engine marks 35–50°F highs as MARGINAL for exactly that reason. San Angelo's edge months live in that band — March averages 73°F highs over 46°F nights.

How many dry hours does exterior paint need before rain?

About 24 — a 0.05"+ shower inside that window streaks or washes fresh latex. San Angelo offers those 24-hour dry runs most reliably in December (rain on just 13% of days); May is the gamble at 20%.

Why does dew ruin fresh paint?

Because a film that hasn't coalesced can't shed water: on cooling San Angelo siding, dew flat-spots the sheen and drags surfactants out in streaks. It forms when the wall reaches the dew point — the engine wants a 5°F spread from 6–11 p.m. Finish 2 hours before sunset and latex gets its lead time.

Can you paint in high humidity?

The label limit is ~80% relative humidity, and it compounds: humid air slows the cure, which pushes wet film into dew hours. The engine flags 80–83% and fails beyond. In San Angelo, the drier December air makes this a non-issue; muggy spells make it the day-killer.

What is surface temperature vs air temperature?

The forecast reports air; the label limits the wall. In direct sun a wall runs 20°F+ hotter — a 97°F San Angelo July day can put a west wall past the 90°F ceiling by mid-afternoon. Follow the shade around the house and check the surface by hand or IR thermometer.

When does painting season end in San Angelo?

The closing bell is the overnight floor. May is the last month averaging viable nights (62°F lows); after that, even warm afternoons sit on failing nights. Spring reopens around March from the same rule.

What humidity is too high for exterior painting?

Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for San Angelo and aim for a falling-humidity afternoon.

What is the dew point rule for exterior painting?

Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.

How windy is too windy to paint outside?

Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.

Why is my fresh exterior paint blistering?

Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.

Exterior Painting glossary

Dew point spread
The gap between air temperature and dew point; painting standards call for surfaces at least 5°F above the dew point to prevent invisible condensation under fresh paint.
Surfactant leaching
Sticky brown or glossy streaks that surface when latex paint dries in cool, damp conditions; usually cosmetic and rinses off after the paint fully cures.
Wet edge
Keeping the boundary of just-applied paint wet so the next stroke blends invisibly; heat, wind, and low humidity shorten it and cause lap marks.
Surface temperature
The actual temperature of siding, which can run 20 to 40°F above air temperature in direct sun; paint labels' limits apply to the surface, not the forecast.
Full cure
The point when paint reaches final hardness and washability — typically 2 to 4 weeks for exterior acrylics — distinct from dry-to-touch, which takes only hours.
Blocking
Fresh paint sticking to itself where surfaces touch, like doors against jambs; worst in heat and humidity before the film fully cures.

People also search for

Other projects in San Angelo

Exterior Painting nearby

Guides

Climatology: NOAA 1991–2020 normals via SAN ANGELO, TX US (8.8 km from San Angelo center, elevation 1890 ft); live outlook by Open-Meteo.