WorkWindow

Roof Coating Weather in Florida: Best Months by City

Roof Coating season in Florida, city by city: peak months, season boundaries, and annual workable-day counts from NOAA 1991–2020 normals. Miami leads with 254 workable days a year; Brandon runs the shortest at 167.

Across Florida's 53 listed cities, annual workable days for roof coating run from 167 (Brandon) up to 254 (Miami). Every number comes from NOAA 1991–2020 normals scored against the same label ruleset; every city name links to its live 10-day check.

If one month anchors the Florida calendar it's March, the statewide leader in workable days. Use this page to pick the month, then the city page's 10-day strip to pick the days — and the national roof coating guide for the physics behind each rule.

Cities in Florida

Peak months and season boundaries from NOAA 1991–2020 normals; season = months with at least 8 workable days.
CityPeak monthsSeasonWorkable days/yr
Miami Mar, Dec, Jan year-round 254
Tampa Nov, Dec, Mar October–May 202
Orlando Mar, Jan, Dec September–May 197
Jacksonville Apr, Mar, Dec September–May 207
Cape Coral Mar, Dec, Jan September–May 197
Palm Bay Mar, Jan, Apr year-round 246
Port St. Lucie Mar, Jan, Feb September–June 193
Kissimmee Mar, Dec, Nov September–June 206
Bonita Springs Mar, Apr, Jan September–May 195
Pensacola Oct, Mar, May September–June 208
Winter Haven Apr, Mar, Nov October–May 190
Lakeland Mar, Nov, Apr October–May 190
St. Petersburg Nov, May, Dec September–June 225
Tallahassee Oct, Nov, Mar September–May 202
Hialeah Mar, Apr, Jan September–June 190
Deltona Mar, Dec, Nov September–May 200
Gainesville Nov, Dec, Mar September–May 214
Ocala Dec, Nov, Mar September–May 192
Fort Lauderdale Mar, Jan, Apr September–June 207
Spring Hill Dec, Nov, Mar September–May 198
Panama City Oct, May, Mar September–June 220
Pembroke Pines Mar, Jan, Apr October–May 181
Leesburg Mar, Apr, May September–May 193
Hollywood Mar, Jan, Feb year-round 231
Miramar Mar, Apr, Jan September–June 190
Coral Springs Mar, Jan, Apr September–June 204
Lehigh Acres Mar, Apr, Jan September–May 195
West Palm Beach Mar, Jan, Apr September–June 214
Brandon Mar, Apr, Nov October–April 167
Clearwater Mar, Apr, Nov September–June 224
Pompano Beach Mar, Jan, Apr September–June 207
Riverview Mar, Nov, Dec September–June 211
Miami Gardens Mar, Jan, Apr September–July 221
Davie Mar, Jan, Apr September–June 196
Boca Raton Mar, Jan, Apr September–June 207
Palm Coast May, Apr, Mar year-round 239
Sunrise Mar, Jan, Apr September–June 196
Plantation Mar, Jan, Apr September–June 196
Fort Myers Mar, Dec, Jan September–May 197
Alafaya Mar, Jan, Dec September–May 191
St. Augustine May, Apr, Mar August–June 222
Deerfield Beach Mar, Jan, Apr September–June 207
Melbourne Mar, Apr, Jan September–June 208
Town 'n' Country Nov, Dec, Mar October–May 202
North Port Mar, Apr, Nov October–May 185
The Villages Mar, Apr, May September–May 193
Homestead Mar, Jan, Apr October–May 179
Largo Mar, Apr, Nov September–June 224
Miami Beach Mar, Dec, Jan year-round 254
Boynton Beach Mar, Apr, Jan September–July 205
Pine Hills Mar, Jan, Dec September–May 191
Kendall Mar, Apr, Jan September–May 180
Doral Mar, Jan, Apr September–June 200

The rules behind these numbers

Typical label thresholds for roof coating — the single ruleset used by every check on this page.
CheckThresholdWhy it matters
Air temperature 50–90°F Acrylic and elastomeric coatings want 50°F+ during application and initial cure.
Overnight low ≥40°F during the first 24 h Water-based coatings can be ruined by a cold, damp night before they skin over.
Dry before ≤0.05" rain in the prior 24 h; watch back to 48 h The membrane must be dry — coatings trap moisture that later blisters.
Dry after <0.05" rain for 24 h after (48 h thick coats want 48 h) Rain inside 24 hours washes uncured coating into gutters.
Evening dew-point spread ≥5°F from 6–11 pm Roofs radiate heat at night and hit the dew point before anything else in the yard.
Daytime humidity ≤85% Humid air slows water-based coatings dramatically.
Wind ≤15 mph (roller only, no spray up to 20 mph) Wind on a roof is a safety limit first and an overspray limit second.

Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.

Other tasks in Florida

More