WorkWindow

Roof Coating Weather in Massachusetts: Best Months by City

Roof Coating season in Massachusetts, city by city: peak months, season boundaries, and annual workable-day counts from NOAA 1991–2020 normals. Boston leads with 139 workable days a year; Springfield runs the shortest at 100.

Across Massachusetts's 14 listed cities, annual workable days for roof coating run from 100 (Springfield) up to 139 (Boston). Every number comes from NOAA 1991–2020 normals scored against the same label ruleset; every city name links to its live 10-day check.

If one month anchors the Massachusetts calendar it's August, the statewide leader in workable days. Use this page to pick the month, then the city page's 10-day strip to pick the days — and the national roof coating guide for the physics behind each rule.

Cities in Massachusetts

Peak months and season boundaries from NOAA 1991–2020 normals; season = months with at least 8 workable days.
CityPeak monthsSeasonWorkable days/yr
Boston Aug, Jul, Sep April–October 139
Worcester Aug, Sep, Jul May–October 115
Springfield Jul, Aug, Sep May–October 100
New Bedford Jul, Aug, Jun May–October 108
Cambridge Aug, Jul, Sep April–October 139
Lowell Aug, Sep, Jul May–October 109
Leominster Aug, Jul, Sep May–October 102
Brockton Aug, Jul, Sep May–October 122
Quincy Aug, Sep, Jul May–October 121
Lynn Aug, Jul, Sep May–October 123
Fall River Jul, Aug, Jun May–October 108
Newton Aug, Jul, Sep May–October 109
Lawrence Aug, Jul, Sep May–October 116
Somerville Aug, Jul, Sep April–October 139

The rules behind these numbers

Typical label thresholds for roof coating — the single ruleset used by every check on this page.
CheckThresholdWhy it matters
Air temperature 50–90°F Acrylic and elastomeric coatings want 50°F+ during application and initial cure.
Overnight low ≥40°F during the first 24 h Water-based coatings can be ruined by a cold, damp night before they skin over.
Dry before ≤0.05" rain in the prior 24 h; watch back to 48 h The membrane must be dry — coatings trap moisture that later blisters.
Dry after <0.05" rain for 24 h after (48 h thick coats want 48 h) Rain inside 24 hours washes uncured coating into gutters.
Evening dew-point spread ≥5°F from 6–11 pm Roofs radiate heat at night and hit the dew point before anything else in the yard.
Daytime humidity ≤85% Humid air slows water-based coatings dramatically.
Wind ≤15 mph (roller only, no spray up to 20 mph) Wind on a roof is a safety limit first and an overspray limit second.

Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.

Other tasks in Massachusetts

More