WorkWindow

Concrete Pouring Weather in New York: Best Months by City

Concrete Pouring season in New York, city by city: peak months, season boundaries, and annual workable-day counts from NOAA 1991–2020 normals. Queens leads with 164 workable days a year; Utica runs the shortest at 102.

New York is not one climate: Queens banks 164 workable concrete pouring days a year while Utica gets 102 — a spread the table below itemizes month by month. Season boundaries mark the first and last month averaging 8+ workable days against the label rules (40–90°F, nights 40°F+).

Statewide, August is the strongest month — it tops or ties the table in most listed cities. The live strips on each city page decide the week; this table decides the month. Scoring rules: methodology; the national playbook: the concrete pouring guide.

Cities in New York

Peak months and season boundaries from NOAA 1991–2020 normals; season = months with at least 8 workable days.
CityPeak monthsSeasonWorkable days/yr
New York Oct, Sep, Aug April–November 157
Brooklyn Oct, Aug, Sep April–November 158
Queens Oct, Sep, Aug April–November 164
Manhattan Oct, Sep, Aug April–November 157
Bronx Sep, Aug, Oct April–November 150
Buffalo Aug, Jul, Sep May–October 116
Rochester Aug, Jul, Sep May–October 115
Albany Aug, Sep, Jul May–October 112
Staten Island Oct, Sep, Aug April–October 149
Syracuse Aug, Jul, Sep May–October 109
Poughkeepsie Sep, Aug, Jul May–October 118
Yonkers Oct, Aug, Sep April–October 132
Binghamton Aug, Sep, Jul May–October 103
Utica Aug, Jul, Sep May–October 102
New Rochelle Oct, Aug, Sep April–October 132

The rules behind these numbers

Typical label thresholds for concrete pouring — the single ruleset used by every check on this page.
CheckThresholdWhy it matters
Air temperature 40–90°F — ideal 50–85°F DIY pours work from 40–90°F; 50–85°F is the sweet spot.
Overnight low ≥40°F during the first 48 h A low under 40°F inside the first 48 hours puts you in cold-weather concreting — not a DIY window.
Dry before no soaking (≥1.0") in the prior 24 h Rain before the pour only matters if the ground is soaked or standing in water.
Dry after <0.1" rain for 6 h after (12 h light rain after finishing still risks surface marks) A downpour in the first 6 hours can wash the surface; after final set, rain actually helps curing.
Wind ≤20 mph (rapid surface drying up to 28 mph) Hot wind pulls bleed water out faster than the slab can handle.

Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.

Other tasks in New York

More