Concrete Pouring Weather in Binghamton, NY: 10-Day Windows & Best Months
In Binghamton, the label math works from May through October: that's the stretch with 8+ workable days a month against typical concrete pouring rules. The single best month is August, averaging 20 days that clear every check — highs of 77°F, lows near 58°F, and a 37% daily rain chance. The strip above runs Binghamton's live forecast; the table below ranks all 12 months.
GOOD — clears every rule MARGINAL — exactly one soft miss NO — a hard fail, or two soft
The rules this check uses
Every verdict above applies this table to Binghamton's hours. DIY scope only: the freeze row outranks everything, and structural work belongs to engineer/ACI specifications.
| Check | Threshold | Why it matters |
|---|---|---|
| Air temperature | 40–90°F — ideal 50–85°F | Checked across the working day, 8 a.m.–6 p.m., against Binghamton's hourly forecast — not just the daily high. |
| Overnight low | ≥40°F during the first 48 h | The engine reads every overnight hour in the cure window, not just Binghamton's forecast low. |
| Dry before | no soaking (≥1.0") in the prior 24 h | Rain before the pour only matters if the ground is soaked or standing in water. |
| Dry after | <0.1" rain for 6 h after (12 h light rain after finishing still risks surface marks) | A downpour in the first 6 hours can wash the surface; after final set, rain actually helps curing. |
| Wind | ≤20 mph (rapid surface drying up to 28 mph) | Wind wrecks application first (drift, lap marks) and carries debris into wet work second. |
Always follow your product label — formulas vary. These rows are the industry-typical range; the can in your Binghamton garage is the contract.
Best months for concrete pouring in Binghamton
| Month | Avg high | Avg low | Rain odds/day | Workable days | |
|---|---|---|---|---|---|
| January | 30°F | 16°F | 52% | 0 | |
| February | 32°F | 17°F | 49% | 0 | |
| March | 41°F | 24°F | 48% | 0 | |
| April | 54°F | 35°F | 47% | 2 | |
| May | 66°F | 46°F | 45% | 17 | |
| June | 74°F | 55°F | 41% | 18 | |
| July | 78°F | 59°F | 41% | 18 | |
| August | 77°F | 58°F | 37% | 20 | |
| September | 70°F | 51°F | 37% | 19 | |
| October | 57°F | 40°F | 43% | 10 | |
| November | 45°F | 31°F | 47% | 0 | |
| December | 34°F | 22°F | 52% | 0 |
Figure 103 workable days a year in Binghamton, spread across May through October. Shoulder months turn on the overnight rule: an afternoon at 66°F passes, but the 40°F night floor is what actually opens the season in May. For the statewide picture, the New York page compares peak months city by city.
Summer's enemy here is the rain gauge: July sees measurable rain on 41% of days, so back-to-back dry 6-hour cure windows come in streaks, not on schedule. The 10-day strip earns its keep in December (52% wet days).
Sealing the same driveway later? Sealcoating in Binghamton wants warmer nights (50°F+) than the pour did.
Numbers above come from NOAA's 1991–2020 normals for Binghamton, Ny Us, 12.6 km from the city center — close enough that neighborhood microclimates (shade lines, river valleys, urban heat) matter more than station distance. See how these day counts are scored.
Binghamton by the numbers
- July is Binghamton's heat peak: 78°F typical high, 0 days over 90°F.
- Coldest month: January — 30°F highs over 16°F nights.
- Wet-to-dry spread: 52% rain days in December versus 37% in August.
- Overnight lows clear 40°F from May to October in a normal year.
- Add it up and Binghamton banks 103 workable days a year for concrete pouring.
Prep checklist
- Clear the 48-hour rule first: two nights over 40°F. May opens that door in Binghamton; January (16°F average lows) slams it.
- Set the stage first: forms braced, subgrade compacted and lightly damp, every tool within reach, help confirmed.
- Cut plastic sheeting and weight it at the pour's edge — Binghamton sees rain on 37% of August days, and the 6-hour rule doesn't negotiate.
- Keep the mix stiff (oatmeal, not soup) — every extra quart of water is permanent surface strength lost.
- Screed while it sheens, float when the sheen dulls, and never trowel bleed water back in.
- Edge and joint with an edger + float set — control joints every 2–3 slab-thicknesses in feet.
- Hold the moisture in (sheeting or misting); when October nights dip toward 40°F, a curing blanket is the difference.
- Feet after 24–48 h, cars after about a week — and structural work follows engineer/ACI specs, not this list.
Gear that saves a window
FTC note: the gear below is unlinked until the affiliate program is switched on. See the affiliate disclosure.
-
Plastic sheeting
Emergency rain cover and moisture-holding cure layer.
-
Curing blanket
Holds heat through cold nights in the critical 48 hours.
-
Concrete mix
An 80-lb bag yields about 0.6 cu ft — do the math twice.
-
Edger + float set
Rounded edges and a flat surface before it sets.
FAQ
What temperature is too cold to pour concrete?
The line is a 40°F low inside the first 48 hours; an actual freeze (32°F) physically damages young concrete. Binghamton's January nights average 16°F — firmly out — while August nights hold near 58°F. Small pours only; structural work follows engineer/ACI specs.
Can you pour concrete before rain?
The engine wants 6 protected hours; light rain later actually feeds the cure. With 52% rain-day odds in December versus 37% in August, Binghamton's dry-season pours barely think about this rule and wet-season pours live by the radar. For small DIY pours; structural schedules follow ACI.
How long does concrete need to be protected from freezing?
Keep it above freezing for at least the first 48 hours (the engine calls any sub-40°F low in that window a NO). In Binghamton that rules out roughly January-adjacent months entirely and makes shoulder-season pours a two-night forecast decision. DIY scope; anything structural follows engineer/ACI cold-weather practice.
Is it OK to pour concrete in hot weather?
To a 90°F high, yes — with shade, cool mix water, a damp subgrade, and a dawn start. Above 90°F the surface sets while the core is plastic and shrinkage cracks map the slab. Binghamton averages 0 such days in July — rarely the binding constraint here.
How long before you can drive on new concrete?
A week before tires, 24–48 hours before feet — at August-typical Binghamton temperatures (77°F highs). When nights slide toward 16°F, add days: cure speed is temperature. Early loads print permanent marks; the bag's cure table wins every argument.
Best season for concrete work in Binghamton?
The table above says August, September and July: enough warmth for the 48-hour cure, short of the 90°F ceiling. For small DIY pours that's the whole answer; structural pours schedule to engineer/ACI requirements, not to a best-months chart.
Related
Other projects in Binghamton
- Deck Staining in Binghamton
- Exterior Painting in Binghamton
- Driveway Sealing in Binghamton
- Roof Coating in Binghamton
- Lawn Seeding in Binghamton
- All outdoor project weather in Binghamton
Concrete Pouring nearby
- Scranton, PA
- Syracuse, NY
- Utica, NY
- Poughkeepsie, NY
- Allentown, PA
- Rochester, NY
- Albany, NY
- Paterson, NJ
Guides
Climatology: NOAA 1991–2020 normals via BINGHAMTON, NY US (12.6 km from Binghamton center, elevation 1606 ft); live outlook by Open-Meteo.