Exterior Painting Weather in Augusta, GA (2026): 10-Day Windows & Best Months

Q: What temperature can you paint outside?

50–90°F for standard formulas, 35°F+ for low-temp lines, and the wall itself must stay 5°F above the dew point. In Augusta the practical range is set by nights: the 40°F overnight floor arrives around March and leaves after November.

Q: How many dry hours does exterior paint need before rain?

Plan 24 rain-free hours after the last coat; the engine fails any day that can't deliver them. With Augusta's rain odds swinging from 22% of days in October to 36% in July, the strip above is mostly a search for that dry pair.

Q: Why does dew ruin fresh paint?

Fresh latex needs hours before it can take standing water; evening condensation gets there first on cooling siding. The check: air minus dew point from 6–11 p.m., 5°F or better. Humid July evenings in Augusta are when GOOD afternoons hide failing nights.

Q: Can you paint in high humidity?

Up to about 80% daytime RH — above that, dry times stretch until the film meets the evening dew. 80–83% reads MARGINAL on the engine; more is a fail. Pair humidity with Augusta's dew-point spread rule and paint mornings-into-early-afternoons in the humid months.

Q: What is surface temperature vs air temperature?

Two different numbers: air (what the app shows) and the wall (what the paint feels). Sun adds 20°F or more; evening radiational cooling subtracts. That's why the engine checks the 90°F top on Augusta's hot afternoons and the dew-point spread after sunset — both are surface problems the air forecast hides.

Q: When does painting season end in Augusta?

The closing bell is the overnight floor. May is the last month averaging viable nights (60°F lows); after that, even warm afternoons sit on failing nights. Spring reopens around March from the same rule.

Q: What humidity is too high for exterior painting?

Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for Augusta and aim for a falling-humidity afternoon.

Q: What is the dew point rule for exterior painting?

Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.

Q: How windy is too windy to paint outside?

Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.

Q: Why is my fresh exterior paint blistering?

Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.

MarchBest month
136 daysWorkable days/yr
6 moSeason length
22–36%Rain-day odds
Augusta by month

The next 10 days in Augusta

GOOD — every label check passes MARGINAL — one soft fail NO — hard fail or several soft

The rules this check uses

These rows are what the Augusta strip checks hour by hour: consensus paint-can requirements, plus the low-temp-formula band the engine marks MARGINAL.

Typical label thresholds for exterior painting — the ruleset behind every Augusta verdict above.
Check	Threshold	Why it matters
Air temperature	50–90°F (low-temp formulas from 35°F)	The film (or mix) chemistry runs on temperature — both while you work and for the first hours after.
Overnight low	≥35°F during the first 24 h (≥40°F preferred)	Curing continues after dark; the first night can undo a perfect afternoon.
Dry before	≤0.05" rain in the prior 12 h; watch back to 24 h	Checked backward from your start hour using the two look-back days in the forecast data.
Dry after	<0.05" rain for 24 h after	The engine sums forecast rain hour by hour through the cure window for Augusta.
Evening dew-point spread	≥5°F from 6–11 pm	When air temperature meets the dew point, water condenses on your fresh work first.
Daytime humidity	≤80%	Read as the daytime maximum, 10 a.m.–5 p.m.; within 3 points of the limit counts as marginal.
Wind	≤15 mph (brush only up to 20 mph)	Wind dries the leading edge too fast and carries overspray.

Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.

Best months for exterior painting in Augusta

Workable days (bar height)Avg high °FAvg low °FRain odds (dot size)

Augusta's calendar, scored: each month's days passing the temperature rules, discounted by that day's historical rain odds (NOAA 1991–2020). Not a forecast.
Month	Avg high	Avg low	Rain odds/day	Workable days
January	60°F	35°F	32%	0
February	64°F	38°F	31%	3
March	71°F	44°F	28%	22
April	78°F	51°F	26%	22
May	86°F	60°F	27%	23
June	91°F	68°F	35%	4
July	94°F	72°F	36%	0
August	93°F	71°F	35%	0
September	88°F	65°F	26%	19
October	79°F	53°F	22%	24
November	69°F	42°F	23%	19
December	62°F	37°F	30%	0

Figure 137 workable days a year in Augusta, spread across March through May. Shoulder months turn on the overnight rule: an afternoon at 71°F passes, but the 40°F night floor is what actually opens the season in March. The Georgia table ranks every listed city by the same math.

July here fails on heat, not rain: the average high of 94°F sits over the 90°F label ceiling, and 31 of 31 days typically top 90°F. Midsummer work moves to dawn or waits for October.

If the walls pass, the roof might too: roof coating in Augusta uses the same film chemistry with tighter dew and wind limits.

Source honesty: every monthly figure on this page is the 1991–2020 normal at Augusta Bush Fld Ap, Ga Us, 10.0 km from Augusta's center — your block's shade lines and wind exposure sit on top of that baseline. Scoring details are on the methodology page.

Route check: the previous stop covers exterior painting in Atlanta, GA; the next one maps exterior painting windows in Columbus, GA.

Augusta by the numbers

Hottest month: July — 94°F average high, 31 days topping 90°F.
The cold floor is January at 60°F afternoons and 35°F overnight.
Measurable rain: July leads at 36% of days; October is the quiet end at 22%.
The 40°F-night season spans March–November here.
Bottom line for Augusta: roughly 137 workable exterior painting days a year.

Prep checklist

Find application day plus 24 dry hours with nights at 40°F+; Augusta offers that pairing most often in October (24 workable days).
Scrape, then wash: loose paint and chalk go first, because latex only grips solid substrate.
Give washed siding 24 hours — north walls in Augusta can need double after a July-grade soak.
An ir surface thermometer settles arguments: label limits bind the wall surface, which outruns Augusta's air by 20°F+ in sun.
Bare wood gets primer, stains get stain-blocker, gaps get caulk — in that order, on dry substrate.
Sequence walls so you always paint in shade; midday sun skins latex before it levels.
Cut in with an angled brush set, roll a wet edge, and drop the sprayer plan over 15 mph.
Stop 2 hours before sunset: with October lows near 53°F, Augusta's siding meets the dew point before the late news.

Pro moves for Augusta conditions

Follow the shade around the house instead of the sun; siding that's hot to the touch will blister paint even when air temperature reads fine.
Cold-rated acrylics that apply down to 35°F still need surfaces to stay above freezing for the next 36 to 48 hours, so check overnight lows.
Dark colors can push a sunlit wall 30°F or more above air temperature; schedule dark accents for early morning or overcast days.
Stop painting two to three hours before the evening dew point converges with air temperature, or the finish can develop dull spots and surfactant streaks.
In Augusta, humidity typically bottoms out mid-afternoon; save the final topcoat for that window and use mornings for prep and priming.

Gear that saves a window

Transparency note: gear links here become affiliate links only when the program is enabled — today they are plain references. See the affiliate disclosure.

Canvas drop cloths
Grips ladders and won't shred like plastic.
Exterior paint + primer
One-coat hide on sound, prepped siding.
Extension pole
Second-story reach without moving the ladder every pass.
Angled brush set
Control at trim, corners, and cut-in lines.
IR surface thermometer
Reads the wall, not the air — sun-baked siding runs hotter.

Frequently asked questions

What temperature can you paint outside?

50–90°F for standard formulas, 35°F+ for low-temp lines, and the wall itself must stay 5°F above the dew point. In Augusta the practical range is set by nights: the 40°F overnight floor arrives around March and leaves after November.

How many dry hours does exterior paint need before rain?

Plan 24 rain-free hours after the last coat; the engine fails any day that can't deliver them. With Augusta's rain odds swinging from 22% of days in October to 36% in July, the strip above is mostly a search for that dry pair.

Why does dew ruin fresh paint?

Fresh latex needs hours before it can take standing water; evening condensation gets there first on cooling siding. The check: air minus dew point from 6–11 p.m., 5°F or better. Humid July evenings in Augusta are when GOOD afternoons hide failing nights.

Can you paint in high humidity?

Up to about 80% daytime RH — above that, dry times stretch until the film meets the evening dew. 80–83% reads MARGINAL on the engine; more is a fail. Pair humidity with Augusta's dew-point spread rule and paint mornings-into-early-afternoons in the humid months.

What is surface temperature vs air temperature?

Two different numbers: air (what the app shows) and the wall (what the paint feels). Sun adds 20°F or more; evening radiational cooling subtracts. That's why the engine checks the 90°F top on Augusta's hot afternoons and the dew-point spread after sunset — both are surface problems the air forecast hides.

When does painting season end in Augusta?

The closing bell is the overnight floor. May is the last month averaging viable nights (60°F lows); after that, even warm afternoons sit on failing nights. Spring reopens around March from the same rule.

What humidity is too high for exterior painting?

Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for Augusta and aim for a falling-humidity afternoon.

What is the dew point rule for exterior painting?

Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.

How windy is too windy to paint outside?

Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.

Why is my fresh exterior paint blistering?

Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.

Exterior Painting glossary

Dew point spread: The gap between air temperature and dew point; painting standards call for surfaces at least 5°F above the dew point to prevent invisible condensation under fresh paint.
Surfactant leaching: Sticky brown or glossy streaks that surface when latex paint dries in cool, damp conditions; usually cosmetic and rinses off after the paint fully cures.
Wet edge: Keeping the boundary of just-applied paint wet so the next stroke blends invisibly; heat, wind, and low humidity shorten it and cause lap marks.
Surface temperature: The actual temperature of siding, which can run 20 to 40°F above air temperature in direct sun; paint labels' limits apply to the surface, not the forecast.
Full cure: The point when paint reaches final hardness and washability — typically 2 to 4 weeks for exterior acrylics — distinct from dry-to-touch, which takes only hours.
Blocking: Fresh paint sticking to itself where surfaces touch, like doors against jambs; worst in heat and humidity before the film fully cures.

People also search for

Other projects in Augusta

Exterior Painting nearby

Guides

Climatology: NOAA 1991–2020 normals via AUGUSTA BUSH FLD AP, GA US (10.0 km from Augusta center, elevation 132 ft); live outlook by Open-Meteo.

Exterior Painting Weather in Augusta, GA: 10-Day Windows & Best Months