- AugustBest month
- 171 daysWorkable days/yr
- 8 moSeason length
- 22–38%Rain-day odds
- Evansville by month
The next 10 days in Evansville
GOOD — clears every rule MARGINAL — exactly one soft miss NO — a hard fail, or two soft
The rules this check uses
Each verdict above is this table applied to Evansville's forecast. Standard latex rules, with the 35°F-rated formulas handled as a marginal band, not a pass.
| Check | Threshold | Why it matters |
|---|---|---|
| Air temperature | 50–90°F (low-temp formulas from 35°F) | Checked across the working day, 8 a.m.–6 p.m., against Evansville's hourly forecast — not just the daily high. |
| Overnight low | ≥35°F during the first 24 h (≥40°F preferred) | The engine reads every overnight hour in the cure window, not just Evansville's forecast low. |
| Dry before | ≤0.05" rain in the prior 12 h; watch back to 24 h | The surface must be dry to the touch and out of a recent soak. |
| Dry after | <0.05" rain for 24 h after | Rain inside the first 24 hours can streak or wash fresh paint. |
| Evening dew-point spread | ≥5°F from 6–11 pm | Scored on the worst hour between 6 and 11 p.m., when surfaces cool past the air. |
| Daytime humidity | ≤80% | High humidity extends recoat and cure times. |
| Wind | ≤15 mph (brush only up to 20 mph) | Wind wrecks application first (drift, lap marks) and carries debris into wet work second. |
Always follow your product label — formulas vary. These rows are the industry-typical range; the can in your Evansville garage is the contract.
Best months for exterior painting in Evansville
| Month | Avg high | Avg low | Rain odds/day | Workable days | |
|---|---|---|---|---|---|
| January | 42°F | 27°F | 29% | 0 | |
| February | 48°F | 31°F | 31% | 0 | |
| March | 58°F | 39°F | 34% | 7 | |
| April | 70°F | 49°F | 38% | 19 | |
| May | 78°F | 58°F | 37% | 20 | |
| June | 86°F | 67°F | 30% | 21 | |
| July | 89°F | 71°F | 26% | 23 | |
| August | 89°F | 70°F | 22% | 24 | |
| September | 84°F | 62°F | 22% | 23 | |
| October | 72°F | 51°F | 25% | 23 | |
| November | 58°F | 40°F | 29% | 11 | |
| December | 47°F | 33°F | 29% | 0 |
The working season runs April through November — about 171 workable days a year. The edges are night-limited: label rules want overnight lows of 40°F+, and Evansville's nights only average that from April to November. For the statewide picture, the Indiana page compares peak months city by city.
Related check: roof coating in Evansville — same 50–90°F chemistry, but roofs hit the dew point first and wind is a safety stop.
Numbers above come from NOAA's 1991–2020 normals for Evansville Museum, In Us, 4.3 km from the city center — close enough that neighborhood microclimates (shade lines, river valleys, urban heat) matter more than station distance. See how these day counts are scored.
Route check: the previous stop covers exterior painting in Elkhart, IN; the next one maps exterior painting windows in Fishers, IN.
Evansville by the numbers
- July is Evansville's heat peak: 89°F typical high, 0 days over 90°F.
- Coldest month: January — 42°F highs over 27°F nights.
- Wet-to-dry spread: 38% rain days in April versus 22% in September.
- Overnight lows clear 40°F from April to November in a normal year.
- Add it up and Evansville banks 171 workable days a year for exterior painting.
Prep checklist
- Two clean days beat one perfect one: 24 h of dry cure and a 40°F+ night — August is Evansville's highest-odds month (24 days).
- Prep is the coat that matters — wash off chalk and mildew, scrape to sound edges.
- Give washed siding 24 hours — north walls in Evansville can need double after a April-grade soak.
- Read the wall, not the app: an ir surface thermometer on sunlit siding shows 20°F+ over Evansville's reported 89°F.
- Prime bare wood and stains; caulk once the surface is dry to the touch.
- Follow the shade around the house — never a wall in direct midday sun.
- Cut in with an angled brush set, roll a wet edge, and drop the sprayer plan over 15 mph.
- Stop 2 hours before sunset: with August lows near 70°F, Evansville's siding meets the dew point before the late news.
Pro moves for Evansville conditions
- Follow the shade around the house instead of the sun; siding that's hot to the touch will blister paint even when air temperature reads fine.
- Cold-rated acrylics that apply down to 35°F still need surfaces to stay above freezing for the next 36 to 48 hours, so check overnight lows.
- Dark colors can push a sunlit wall 30°F or more above air temperature; schedule dark accents for early morning or overcast days.
- Stop painting two to three hours before the evening dew point converges with air temperature, or the finish can develop dull spots and surfactant streaks.
- In Evansville, humidity typically bottoms out mid-afternoon; save the final topcoat for that window and use mornings for prep and priming.
Gear that saves a window
FTC note: the gear below is unlinked until the affiliate program is switched on. See the affiliate disclosure.
-
Angled brush set
Control at trim, corners, and cut-in lines.
-
IR surface thermometer
Reads the wall, not the air — sun-baked siding runs hotter.
-
Canvas drop cloths
Grips ladders and won't shred like plastic.
-
Extension pole
Second-story reach without moving the ladder every pass.
-
Exterior paint + primer
One-coat hide on sound, prepped siding.
Frequently asked questions
What temperature can you paint outside?
Standard latex: 50–90°F with nights of 40°F+; low-temperature formulas are rated down to 35°F and the engine marks 35–50°F highs as MARGINAL for exactly that reason. Evansville's edge months live in that band — April averages 70°F highs over 49°F nights.
How many dry hours does exterior paint need before rain?
About 24 — a 0.05"+ shower inside that window streaks or washes fresh latex. Evansville offers those 24-hour dry runs most reliably in September (rain on just 22% of days); April is the gamble at 38%.
Why does dew ruin fresh paint?
Because a film that hasn't coalesced can't shed water: on cooling Evansville siding, dew flat-spots the sheen and drags surfactants out in streaks. It forms when the wall reaches the dew point — the engine wants a 5°F spread from 6–11 p.m. Finish 2 hours before sunset and latex gets its lead time.
Can you paint in high humidity?
The label limit is ~80% relative humidity, and it compounds: humid air slows the cure, which pushes wet film into dew hours. The engine flags 80–83% and fails beyond. In Evansville, the drier September air makes this a non-issue; muggy spells make it the day-killer.
What is surface temperature vs air temperature?
The forecast reports air; the label limits the wall. In direct sun a wall runs 20°F+ hotter — a 89°F Evansville July day can put a west wall past the 90°F ceiling by mid-afternoon. Follow the shade around the house and check the surface by hand or IR thermometer.
When does painting season end in Evansville?
The closing bell is the overnight floor. November is the last month averaging viable nights (40°F lows); after that, even warm afternoons sit on failing nights. Spring reopens around April from the same rule.
What humidity is too high for exterior painting?
Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for Evansville and aim for a falling-humidity afternoon.
What is the dew point rule for exterior painting?
Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.
How windy is too windy to paint outside?
Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.
Why is my fresh exterior paint blistering?
Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.
Exterior Painting glossary
- Dew point spread
- The gap between air temperature and dew point; painting standards call for surfaces at least 5°F above the dew point to prevent invisible condensation under fresh paint.
- Surfactant leaching
- Sticky brown or glossy streaks that surface when latex paint dries in cool, damp conditions; usually cosmetic and rinses off after the paint fully cures.
- Wet edge
- Keeping the boundary of just-applied paint wet so the next stroke blends invisibly; heat, wind, and low humidity shorten it and cause lap marks.
- Surface temperature
- The actual temperature of siding, which can run 20 to 40°F above air temperature in direct sun; paint labels' limits apply to the surface, not the forecast.
- Full cure
- The point when paint reaches final hardness and washability — typically 2 to 4 weeks for exterior acrylics — distinct from dry-to-touch, which takes only hours.
- Blocking
- Fresh paint sticking to itself where surfaces touch, like doors against jambs; worst in heat and humidity before the film fully cures.
People also search for
Related
Other projects in Evansville
- Deck Staining in Evansville
- Driveway Sealing in Evansville
- Concrete Pouring in Evansville
- Roof Coating in Evansville
- Lawn Seeding in Evansville
- All outdoor project weather in Evansville
Exterior Painting nearby
- Bowling Green, KY
- Elizabethtown, KY
- Bloomington, IN
- Clarksville, TN
- Terre Haute, IN
- Louisville, KY
- Nashville, TN
- Indianapolis, IN
Guides
Climatology: NOAA 1991–2020 normals via EVANSVILLE MUSEUM, IN US (4.3 km from Evansville center, elevation 374 ft); live outlook by Open-Meteo.