- MarchBest month
- 152 daysWorkable days/yr
- 7 moSeason length
- 15–28%Rain-day odds
- Irving by month
The next 10 days in Irving
GOOD — clears every rule MARGINAL — exactly one soft miss NO — a hard fail, or two soft
The rules this check uses
Each verdict above is this table applied to Irving's forecast. Standard latex rules, with the 35°F-rated formulas handled as a marginal band, not a pass.
| Check | Threshold | Why it matters |
|---|---|---|
| Air temperature | 50–90°F (low-temp formulas from 35°F) | Checked across the working day, 8 a.m.–6 p.m., against Irving's hourly forecast — not just the daily high. |
| Overnight low | ≥35°F during the first 24 h (≥40°F preferred) | The engine reads every overnight hour in the cure window, not just Irving's forecast low. |
| Dry before | ≤0.05" rain in the prior 12 h; watch back to 24 h | The surface must be dry to the touch and out of a recent soak. |
| Dry after | <0.05" rain for 24 h after | Rain inside the first 24 hours can streak or wash fresh paint. |
| Evening dew-point spread | ≥5°F from 6–11 pm | Scored on the worst hour between 6 and 11 p.m., when surfaces cool past the air. |
| Daytime humidity | ≤80% | High humidity extends recoat and cure times. |
| Wind | ≤15 mph (brush only up to 20 mph) | Wind wrecks application first (drift, lap marks) and carries debris into wet work second. |
Always follow your product label — formulas vary. These rows are the industry-typical range; the can in your Irving garage is the contract.
Best months for exterior painting in Irving
| Month | Avg high | Avg low | Rain odds/day | Workable days | |
|---|---|---|---|---|---|
| January | 56°F | 36°F | 22% | 0 | |
| February | 61°F | 40°F | 24% | 11 | |
| March | 69°F | 48°F | 25% | 23 | |
| April | 76°F | 55°F | 24% | 23 | |
| May | 84°F | 64°F | 28% | 22 | |
| June | 92°F | 72°F | 24% | 4 | |
| July | 96°F | 76°F | 15% | 0 | |
| August | 96°F | 76°F | 17% | 0 | |
| September | 89°F | 68°F | 18% | 16 | |
| October | 78°F | 57°F | 21% | 24 | |
| November | 67°F | 46°F | 21% | 24 | |
| December | 58°F | 38°F | 21% | 5 |
Figure 153 workable days a year in Irving, spread across February through May. Shoulder months turn on the overnight rule: an afternoon at 61°F passes, but the 40°F night floor is what actually opens the season in February. For the statewide picture, the Texas page compares peak months city by city.
July here fails on heat, not rain: the average high of 96°F sits over the 90°F label ceiling, and 31 of 31 days typically top 90°F. Midsummer work moves to dawn or waits for October.
If the walls pass, the roof might too: roof coating in Irving uses the same film chemistry with tighter dew and wind limits.
Numbers above come from NOAA's 1991–2020 normals for Dallas Ft Worth Ap, Tx Us, 6.5 km from the city center — close enough that neighborhood microclimates (shade lines, river valleys, urban heat) matter more than station distance. See how these day counts are scored.
For contrast, Houston, TX’s exterior painting calendar sits one stop back on this route, and exterior painting in Killeen, TX is next in line.
Irving by the numbers
- August is Irving's heat peak: 96°F typical high, 31 days over 90°F.
- Coldest month: January — 56°F highs over 36°F nights.
- Wet-to-dry spread: 28% rain days in May versus 15% in July.
- Overnight lows clear 40°F from February to November in a normal year.
- Add it up and Irving banks 153 workable days a year for exterior painting.
Prep checklist
- Find application day plus 24 dry hours with nights at 40°F+; Irving offers that pairing most often in October (24 workable days).
- Prep is the coat that matters — wash off chalk and mildew, scrape to sound edges.
- Give washed siding 24 hours — north walls in Irving can need double after a May-grade soak.
- An ir surface thermometer settles arguments: label limits bind the wall surface, which outruns Irving's air by 20°F+ in sun.
- Prime bare wood and stains; caulk once the surface is dry to the touch.
- Sequence walls so you always paint in shade; midday sun skins latex before it levels.
- Cut in with an angled brush set, roll a wet edge, and drop the sprayer plan over 15 mph.
- Stop 2 hours before sunset: with October lows near 57°F, Irving's siding meets the dew point before the late news.
Pro moves for Irving conditions
- Follow the shade around the house instead of the sun; siding that's hot to the touch will blister paint even when air temperature reads fine.
- Cold-rated acrylics that apply down to 35°F still need surfaces to stay above freezing for the next 36 to 48 hours, so check overnight lows.
- Dark colors can push a sunlit wall 30°F or more above air temperature; schedule dark accents for early morning or overcast days.
- Stop painting two to three hours before the evening dew point converges with air temperature, or the finish can develop dull spots and surfactant streaks.
- In Irving, humidity typically bottoms out mid-afternoon; save the final topcoat for that window and use mornings for prep and priming.
Gear that saves a window
FTC note: the gear below is unlinked until the affiliate program is switched on. See the affiliate disclosure.
-
Exterior paint + primer
One-coat hide on sound, prepped siding.
-
IR surface thermometer
Reads the wall, not the air — sun-baked siding runs hotter.
-
Angled brush set
Control at trim, corners, and cut-in lines.
-
Canvas drop cloths
Grips ladders and won't shred like plastic.
-
Extension pole
Second-story reach without moving the ladder every pass.
Frequently asked questions
What temperature can you paint outside?
50–90°F for standard formulas, 35°F+ for low-temp lines, and the wall itself must stay 5°F above the dew point. In Irving the practical range is set by nights: the 40°F overnight floor arrives around February and leaves after November.
How many dry hours does exterior paint need before rain?
Plan 24 rain-free hours after the last coat; the engine fails any day that can't deliver them. With Irving's rain odds swinging from 15% of days in July to 28% in May, the strip above is mostly a search for that dry pair.
Why does dew ruin fresh paint?
Fresh latex needs hours before it can take standing water; evening condensation gets there first on cooling siding. The check: air minus dew point from 6–11 p.m., 5°F or better. Humid May evenings in Irving are when GOOD afternoons hide failing nights.
Can you paint in high humidity?
Up to about 80% daytime RH — above that, dry times stretch until the film meets the evening dew. 80–83% reads MARGINAL on the engine; more is a fail. Pair humidity with Irving's dew-point spread rule and paint mornings-into-early-afternoons in the humid months.
What is surface temperature vs air temperature?
Two different numbers: air (what the app shows) and the wall (what the paint feels). Sun adds 20°F or more; evening radiational cooling subtracts. That's why the engine checks the 90°F top on Irving's hot afternoons and the dew-point spread after sunset — both are surface problems the air forecast hides.
When does painting season end in Irving?
The closing bell is the overnight floor. May is the last month averaging viable nights (64°F lows); after that, even warm afternoons sit on failing nights. Spring reopens around February from the same rule.
What humidity is too high for exterior painting?
Most acrylic paints apply well between 40 and 70 percent relative humidity. Above about 85 percent, water can't evaporate from the film, so drying stalls, sags develop, and surfactants rise as sticky brown streaks. Very low humidity under 20 percent causes the opposite problem — paint dries too fast to level. Check the hourly forecast for Irving and aim for a falling-humidity afternoon.
What is the dew point rule for exterior painting?
Coating manufacturers require the surface to be at least 5°F above the dew point during application and initial drying. Closer than that, an invisible film of condensation forms on the siding, which ruins adhesion and can flash-rust bare metal. Practically, start after morning dew has fully evaporated and stop early enough that paint is set before the evening temperature drop.
How windy is too windy to paint outside?
Sustained winds above about 15 mph make brushing and rolling risky: paint skins before it levels, lap marks multiply, and dust or pollen embeds in the wet film. Spraying is far more sensitive — overspray drifts onto cars and neighbors above roughly 5 to 10 mph. Wind also accelerates drying, shortening your wet edge, so pick calm mornings for large walls.
Why is my fresh exterior paint blistering?
Heat blisters form when paint is applied to siding baking in direct sun — the surface skins over, then trapped solvent or water vaporizes underneath. Moisture blisters appear when paint goes over damp wood or when interior moisture pushes outward. Paint shaded sides, keep surfaces under about 90°F, and let rain-soaked siding dry a day or two before coating.
Exterior Painting glossary
- Dew point spread
- The gap between air temperature and dew point; painting standards call for surfaces at least 5°F above the dew point to prevent invisible condensation under fresh paint.
- Surfactant leaching
- Sticky brown or glossy streaks that surface when latex paint dries in cool, damp conditions; usually cosmetic and rinses off after the paint fully cures.
- Wet edge
- Keeping the boundary of just-applied paint wet so the next stroke blends invisibly; heat, wind, and low humidity shorten it and cause lap marks.
- Surface temperature
- The actual temperature of siding, which can run 20 to 40°F above air temperature in direct sun; paint labels' limits apply to the surface, not the forecast.
- Full cure
- The point when paint reaches final hardness and washability — typically 2 to 4 weeks for exterior acrylics — distinct from dry-to-touch, which takes only hours.
- Blocking
- Fresh paint sticking to itself where surfaces touch, like doors against jambs; worst in heat and humidity before the film fully cures.
People also search for
Related
Other projects in Irving
- Deck Staining in Irving
- Driveway Sealing in Irving
- Concrete Pouring in Irving
- Roof Coating in Irving
- Lawn Seeding in Irving
- All outdoor project weather in Irving
Exterior Painting nearby
- Carrollton, TX
- Grand Prairie, TX
- Dallas, TX
- Lewisville, TX
- Arlington, TX
- Richardson, TX
- Plano, TX
- Garland, TX
Guides
Climatology: NOAA 1991–2020 normals via DALLAS FT WORTH AP, TX US (6.5 km from Irving center, elevation 560 ft); live outlook by Open-Meteo.