WorkWindow

Roof Coating Weather in Utah: Best Months by City

Roof Coating season in Utah, city by city: peak months, season boundaries, and annual workable-day counts from NOAA 1991–2020 normals. West Jordan leads with 123 workable days a year; Provo runs the shortest at 90.

Across Utah's 12 listed cities, annual workable days for roof coating run from 90 (Provo) up to 123 (West Jordan). Every number comes from NOAA 1991–2020 normals scored against the same label ruleset; every city name links to its live 10-day check.

If one month anchors the Utah calendar it's September, the statewide leader in workable days. Use this page to pick the month, then the city page's 10-day strip to pick the days — and the national roof coating guide for the physics behind each rule.

Cities in Utah

Peak months and season boundaries from NOAA 1991–2020 normals; season = months with at least 8 workable days.
CityPeak monthsSeasonWorkable days/yr
Salt Lake City Jun, Sep, May April–June 114
Provo Sep, May, Jun April–June 90
Ogden Sep, Jun, May August–October 108
St. George Oct, Apr, May March–May 97
West Valley City Jun, Sep, May April–June 114
Logan Jun, Aug, Sep May–September 98
West Jordan Jun, Sep, May April–October 123
Orem Sep, May, Jun April–June 90
Sandy Jun, Sep, May April–October 123
Lehi Jun, Sep, May May–June 93
Layton Jun, Sep, Aug August–October 114
South Jordan Jun, Sep, May April–October 123

The rules behind these numbers

Typical label thresholds for roof coating — the single ruleset used by every check on this page.
CheckThresholdWhy it matters
Air temperature 50–90°F Acrylic and elastomeric coatings want 50°F+ during application and initial cure.
Overnight low ≥40°F during the first 24 h Water-based coatings can be ruined by a cold, damp night before they skin over.
Dry before ≤0.05" rain in the prior 24 h; watch back to 48 h The membrane must be dry — coatings trap moisture that later blisters.
Dry after <0.05" rain for 24 h after (48 h thick coats want 48 h) Rain inside 24 hours washes uncured coating into gutters.
Evening dew-point spread ≥5°F from 6–11 pm Roofs radiate heat at night and hit the dew point before anything else in the yard.
Daytime humidity ≤85% Humid air slows water-based coatings dramatically.
Wind ≤15 mph (roller only, no spray up to 20 mph) Wind on a roof is a safety limit first and an overspray limit second.

Always follow your product label — formulas vary. The table above is the typical range across major manufacturers, not a promise about your can.

Other tasks in Utah

More